Page 1 of Printer problems

PCs & Mobiles Forum

Printer problems

Paull (Elite) posted this on Friday, 9th July 2010, 09:03

My printer stopped printing anything. It would send the paper through with nothing printed. Several cleans later I have Black. I cannot get colour at all. My printer has 2 separate blacks & separate red/blue/yellow. I replaced the cartridges, I downloaded the latest drivers. I have deep cleaned several times. I have looked in the printing preferences & all seems OK. I have tried a head alignment. It printed OK yesterday evening, but nothing this morning. Any ideas?

This item was edited on Friday, 9th July 2010, 10:04

RE: Printer problems

fcmcd (Competent) posted this on Friday, 9th July 2010, 10:13

do you use your printer much ,as it sounds very much like the ink has dried up in the heads due to lack of use, you can try deep cleaning it again ,but if this produces no results ,its a trip to the printer repair shop, have you had any onscreen messages about your printer needing serviced or (service required parts in your printer are near the end of their service life) as if you get these messages on an epson they stop printing even if you change the cartridges, hope this helps.

RE: Printer problems

Mister Smee (Elite) posted this on Friday, 9th July 2010, 10:16

This website has been useful in the past: http://www.fixyourownprinter.com/

---

Could someone please
Remove these cutleries
From my knees...

This item was edited on Friday, 9th July 2010, 11:16

RE: Printer problems

RJS (undefined) posted this on Friday, 9th July 2010, 11:17

Does sound like a major head clog from dried ink.

You should turn on your printer once a week even if you don`t print anything, just enough for it to do the warm up process. That prevents the head clogging and also means you very very rarely have to run the cleaning cycles.


Editor
DVD REVIEWER
MYREVIEWER.COM

"The Green Belt policy is a Labour Policy, and we intend to Build on it"
John Prescott

RE: Printer problems

Snaps (Elite) posted this on Friday, 9th July 2010, 11:25

I`ve got a similar problem.
My old Epson wont print colour no matter how many cleans it`s gone through.
Could well be as described that the head is terminally clogged but that fix your own printer link wants to sell me stuff and the printer is probably no longer worth the price of the cleaner.
If it`s more than two or three years old it`s probably recycle time and buy a new one.
I just keep putting it off due to lack of funds.

Snaps

Every Third Car





I used to be with it, but then they changed what `it` was.
Now, what I`m with isn`t it, and what`s `it` seems weird and scary

RE: Printer problems

Rassilon (Elite) posted this on Friday, 9th July 2010, 12:52

Saucer with a thin layer of hot\boiling water, fold & place tissue paper in it to soak up the water, then rest the print head on the paper to unclog the head, can take a while to unclog the head 20 mins was the worst case.

If it was printing yesterday, but not today, all those deep cleans waste ink like buggery.



I consider myself an optimist, albeit an optimist with cynical tendencies and a dark side that Lucifer himself would find a little creepy. (Perhaps you've noticed.) You don't normally associate cynicism with an upbeat pov. But I have exactly that combination and will defend it.

Violent & emotionally unstable duck with rocket propelled grenade launcher, seeks desk job preferably around other people.

Administrator at ADTelly - Accessing UK & US TV from overseas.
Non referal link.

RE: Printer problems

RJS (undefined) posted this on Friday, 9th July 2010, 12:59

I refuse to recycle my Epson Photo 950, I`ve even completely dismantled it and cleaned it to keep it going. Plus with careful ebay watching the genuine inks are about £4 a go, and it really can`t be bettered as a photo printer unless you want something bigger than A4 anyway.


Editor
DVD REVIEWER
MYREVIEWER.COM

"The Green Belt policy is a Labour Policy, and we intend to Build on it"
John Prescott

RE: Printer problems

Paull (Elite) posted this on Saturday, 10th July 2010, 10:36

I do use my printer a lot, as I said it was used the evening before. It is about 5 years old. I use copy cartridges & have done so for about 4 of those years with no problem at all. I`m not sure about the `head`. Does each of the inks have a separate head or is it one head for all the 5 inks. I was in the process of buying another printer but wanted this as a spare, so would like to get it going again, if poss`. Thanks for all your help. I will try the water method rass` thanks.

RE: Printer problems

RJS (undefined) posted this on Saturday, 10th July 2010, 12:37

Depends on the model, I know a lot of Epsons have the print heads in the carts.


Editor
DVD REVIEWER
MYREVIEWER.COM

"The Green Belt policy is a Labour Policy, and we intend to Build on it"
John Prescott

RE: Printer problems

Snaps (Elite) posted this on Saturday, 10th July 2010, 14:06

Quote:
Robert John Shepherd says...
Depends on the model, I know a lot of Epsons have the print heads in the carts.
Any idea if that applies to the Stylus Photo 890 which I think is about the same vintage as yours.
I can`t find the info on a first trawl of Google. If they`re not in the cart I`ll try the Rass method.

Snaps

Every Third Car





I used to be with it, but then they changed what `it` was.
Now, what I`m with isn`t it, and what`s `it` seems weird and scary

Go back to PCs & Mobiles Forum threads, or All Forum threads