montezumola(Harmless) posted this on Monday, 18th December 2000, 21:19
Okay, I`ve just updated my firmware so that it now has the latest release (version 204s). I looked in the `secret` menu to find no macrovision disable options. I looked at the accompying instructions which told me what to do (setup-step-title-prev). I then looked at the macrovision status and the ADV7172 reads :
00000003
And not the 00000001 which I assume is Macrovision disabled!
What am I doing wrong!?!?
Any help would be greatfully appreciated!!!!
Regards,
Monte.
RE: Scan Macrovision - what am I doing wrong? *s*
DaveyG(Competent) posted this on Monday, 18th December 2000, 23:19
Hello Montezumola... or Monte for short..
Your not doing anything wrong... Try recording a dvd film onto VHS.. If it looks fine then the macrovision is diabled... Otherwise try the remote key combination again..
I have version 2.04s installed... With macrovision disabled... Still reports 00000003. but with no macro...
RE: Scan Macrovision - what am I doing wrong? *s*
Nexstar(Competent) posted this on Tuesday, 19th December 2000, 00:05
I had the same when I updated. It was the result code which changed at the bottom of the screen. It was 00000000 before the hack and then 00000001 afterwards.
RE: Scan Macrovision - what am I doing wrong? *s*
nelley(Elite) posted this on Tuesday, 19th December 2000, 10:11
email me on yellen[at]ku.oc.nacs for the non macro version.They tried to pull a fast one on me by sending me the non macro version but thanks to a few posts in teh forum they sent me the correct version. nilesh scan
RE: Scan Macrovision - what am I doing wrong? *s*
Malky(Competent) posted this on Tuesday, 19th December 2000, 13:20
The rotters ;-)
RE: Scan Macrovision - what am I doing wrong? *s*
bear(Elite) posted this on Tuesday, 19th December 2000, 13:33
What am I doing wrong!?!?
Well its more a case of done rather then doing wrong, youve bought the piece of sh*te.
Is it true that scans multiregion means no matter what region the disc comes from,the scan will refuse to play it?
This item was edited on Tuesday, 19th December 2000, 15:09
RE: Scan Macrovision - what am I doing wrong? *s*
montydeno(Harmless) posted this on Tuesday, 19th December 2000, 15:55
Can anybody tell me what improvement this version has over the previous versions? thanks.
RE: Scan Macrovision - what am I doing wrong? *s*
The Ironduke(Elite) posted this on Tuesday, 19th December 2000, 19:07
"What am I doing wrong!?!?
Well its more a case of done rather then doing wrong, youve bought the piece of sh*te.
Is it true that scans multiregion means no matter what region the disc comes from,the scan will refuse to play it?"
YOU REALLY ARE A FUNNY GUY:)
HITACHI ROCKS FOR BEAR!
RE: Scan Macrovision - what am I doing wrong? *s*
DaveyG(Competent) posted this on Thursday, 21st December 2000, 23:58
Sounds like Mr Bear and Mr IronDuke are jealous of the progress a sub £200 DVD player is making against the over priced steaming pile of cow droppings they purchased… Or they’re bored and don’t have any other friends or girlfriends?
All I have to say to Mr Bear and Mr IronDuke is welcome to the Scan elite. We welcome you lower life forms.
RE scan 2000
Fletch(Harmless) posted this on Tuesday, 26th December 2000, 16:58
I have the scan 2000 i played the buffy season 1 dvds but cannot disable the substitles on the dvd it it says not allowed can you help.my email is rehctelf.sirhc[at]ku.oc.rednoyeulb
