Page 1 of re:compacks dvd-101(drw-101)

Having problem finding rf output channel for dvd 101 on tv connected as diagram, see link below.

hosting.mixcat.com/remlap/123.jpg

works on scart fine

Thanks

This item was edited on Thursday, 29th July 2004, 21:29

I would hazard a guess that the DVD 101 doesn`t actually output on RF but just passes the signal through and onto the next unit, in your case your TV.

I have been experiencing the same problem. I can only see the output from the 101 via scart and no output is able to be tuned in on the TV.

Has anyone experienced the problem of the 101 not recognising channels as being active or receiving a signal when they try to use the Timer Record function? No matter which of the 7 channels or AV 1-3 I try they all say they are not getting a signal but in Live mode the signals are fine on those channels?

Hi

I think you need to place your DVD further up your loop. I have mine connected directly to the aerial and then out into the VCR and from there into the TV. Not too sure as to where you would locate your digi box but at a guess it would be first followed by DVD then VCR then TV.

Good luck with it.

The 101 is a sod to work with but once set up it seems to work quite well.

From Andrew C

Quote:
I would hazard a guess that the DVD 101 doesn`t actually output on RF but just passes the signal through and onto the next unit, in your case your TV.