Page 1 of Updating the Scan2000

Hardware Forum

Updating the Scan2000

JoJoBhoy (Mostly Harmless) posted this on Sunday, 14th January 2001, 19:25

Tried copying the file to CDR and a CDRW and still dosen`t update.
Any particular software needed to do this.. Any type of CD..

Joe.

P.S.

All the anti-scan bores need not answer..
Anybody with a signature " XXXX Rocks " need not answer...

Ta.

RE: Updating the Scan2000

Malky (Competent) posted this on Sunday, 14th January 2001, 21:06

I used WinOnCD with default settings and it worked fine.

There are problems using Nero 5 (with default settings) coz my mate tried it and it spat the CD out. When he burned another with WinOnCD it worked fine.

HTH

Malcolm

RE: Updating the Scan2000

wooler (Mostly Harmless) posted this on Sunday, 14th January 2001, 23:29

I too originally had problems with Nero but with the settings I got from chris4510 (thanks) it worked fine, they are as follows

Copy tdvd-000.ROM file with no file attributes as a CDROM (ISO).
Under the file options tab select ISO Level 2, Mode 2/XA, Character Set should be Dos. All the other options on this page should be off

This item was edited on Sunday, 14th January 2001, 23:56

RE: Updating the Scan2000

JoJoBhoy (Mostly Harmless) posted this on Monday, 15th January 2001, 19:57

Cheers Wooler this seems! to have done the trick.. The screen came up blue with a fuzzy bar along the bottom of the screen.. Checked the version and It was OK...

Another Q you may be able to help me with - When I run Matrix or blade I get the letterbox effect. It takes up about a 40% of the screen.. Is this down to the TV. I have tried the settings in the setup/audio settings ? Any thing else I can do - Thanks

Joe.

Go back to Hardware Forum threads, or All Forum threads