Page 1 of Multiregion hack for LG 2330P

I have tried the multi region hack for the aiwa and unfortunately it does not work, however the instructions for finding the firmware version (see below) DO!

Can any one help me hack my DVD????


MODEL : DVD 2200P LGEUK
REGION : NO 02
NATION : GB
MICOM : VER 1.5 19991110
SERVO : 0110
MPEG : 0L20 14MAY99 C1
MISCEL : 10

Ive tried the,

Multi-region Remote Hack
• Reports confirm that this hack works with the following LG players; DVD-2330P, DVD-3000E, DVD-3350/1/E/C (and clones), DA-3520, DVD-4210, DVD-4710, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
• It has been reported that this hack will work with the more recent version of the LG DVD-3200E but not on the earlier version running firmware 1.0.
• You can perform this hack as many times as you want and the currently selected Region will stick until you change it again. Only a very long power cut may cause the player to revert to the factory default setting of Region 2 (in which case just perform the hack again).
• An odd quirk of this hack is that even when you specifically set the player to Region 1 only, it will still play discs from Region 2! This is actually quite useful if your collection consists of some RCE protected Region 1 titles and also Region 2 discs which do not (normally) have RCE.
• If you are having trouble getting the hack to work, try pressing
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display)

Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
Press "PAUSE" on the remote
Power the player off and then back on
• If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
<"mailto:llortti[at]ku.oc.dvdgl" class="decrypt"> <"mailto:llortti[at]ku.oc.dvdgl" class="decrypt">
<"mailto:llortti[at]ku.oc.esuoherawifics" class="decrypt">

I have tried your suggestions above but still my player is not responding the tv screen remains with the dvd logo. It would be very much appreciated if you could help me with this problem.

Cheers
tommy

hi tommy

repeat the hack again but watch the front of the dvd player and not the tv screen, you have to perform this hack as quickly as possible as you only have about 2 seconds to input the region code

hope this helps
wonder

Thanks for your help, but i think the firmware revision of my player is outdated as there is nothing displayed on the lcd apart from no disc warning, if you have any further suggestions i am more than willing to try them out.

much appreciated
Tommy