Info and forum posts by 'wonder'
This user hasn't used our main site yet, so has no main account at present.
Joined on: Friday, 23rd March 2001, 14:11, Last used: Friday, 23rd March 2001, 14:11
Access Level: Competent
About this user: This user has chosen not to submit a description :(
This user has posted a total of 353 messages. On average, since joining, this user has posted 0.04 messages a day, or 0.29 messages a week. In the last 30 days, this user has posted 0 messages, which is on average 0 messages a day.
Recent Messages Posted:
RE: alba dvd108 country code help
keep it at 13 already multiregion
philips dvd 580m hack required
tried the play 159 hack no success
tried the rc6 hack with one for all digital remote no success
any help would be appreciated
many thanks
wonder
RE: Philips DVDR 880 - multiregion hack?!?
go into the players menu and change it from a dvd recorder to dvd player then do the hack with the oneforall remote as this will not lock after 25 swaps, and then change it back to dvd recorder
hope this helps
wonder
RE: Sanyo DCTS-750 Home Theatre Kit - Hack Required
please could you send me the firmware
my e-mail 3retnuh.s[at]ku.oc.mooz
many thanks
wonder
RE: Remote Hack For LG DVD
Multi-region Remote Hack
Reports confirm that this hack works with the following LG players; DVD-2330P, DVD-3000E, DVD-3350/1/E/C (and clones), DA-3520, DVD-4210, DVD-4710, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
It has been reported that this hack will work with the more recent version of the LG DVD-3200E but not on the earlier version running firmware 1.0.
You can perform this hack as many times as you want and the currently selected Region will stick until you change it again. Only a very long power cut may cause the player to revert to the factory default setting of Region 2 (in which case just perform the hack again).
An odd quirk of this hack is that even when you specifically set the player to Region 1 only, it will still play discs from Region 2! This is actually quite useful if your collection consists of some RCE protected Region 1 titles and also Region 2 discs which do not (normally) have RCE.
If you are having trouble getting the hack to work, try pressing
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display)
Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
Press "PAUSE" on the remote
Power the player off and then back on
If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
How can I enable VCD playback on my LG DVD Player?
WARNING: Do not attempt this hack unless it has been confirmed to work with your player. Reports show that it completely screws-up players which do not have latent VCD capability. If your player is not specifically listed below, then assume that the hack does not work on that model. Choose to ignore this warning at your own peril.
Reports confirm that this hack works with the following LG players; DA-3520, DVD-3000E, DVD-3350/1/E/C, DVD-4210, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
If the transport in your player cannot read CD-R/CD-RW then only original pressed "silver" VCDs can be played.
I strongly advise that you do not experiment with any other values or settings other than the ones specified. Doing so may result in undesired effects (e.g. foreign language menus) or may even disable your player completely.
No changes are saved until you press the "ENTER" button. So if you think you have made a mistake before reaching that point, simply press "RETURN" and the procedure will be cancelled.
I cannot of course accept any responsibility for anything that happens to your player whilst you are poking around with these settings.
Follow these instructions very carefully.
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "1472" on the remote (the characters 01 47 should appear on the display)
[If your player is a non UK model, this number will probably be different - don`t worry]
Press the UP arrow three times (the characters 04 Fd should appear on the display)
[This number may be different depending on the configuration of your specific model - don`t worry]
Press "PROGRAM", "6", "PROGRAM", "5" (the characters 04 FE should now be displayed)
Press "ENTER" (the display should flash briefly)
Press "RETURN"
Power the player off and then back on
Play a VCD!
RE: LG DA-3520 CODE
WARNING: Do not attempt this hack unless it has been confirmed to work with your player. Reports show that it completely screws-up players which do not have latent VCD capability. If your player is not specifically listed below, then assume that the hack does not work on that model. Choose to ignore this warning at your own peril.
Reports confirm that this hack works with the following LG players; DA-3520, DVD-3000E, DVD-3350/1/E/C, DVD-4210, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
If the transport in your player cannot read CD-R/CD-RW then only original pressed "silver" VCDs can be played.
I strongly advise that you do not experiment with any other values or settings other than the ones specified. Doing so may result in undesired effects (e.g. foreign language menus) or may even disable your player completely.
No changes are saved until you press the "ENTER" button. So if you think you have made a mistake before reaching that point, simply press "RETURN" and the procedure will be cancelled.
I cannot of course accept any responsibility for anything that happens to your player whilst you are poking around with these settings.
Follow these instructions very carefully.
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "1472" on the remote (the characters 01 47 should appear on the display)
[If your player is a non UK model, this number will probably be different - don`t worry]
Press the UP arrow three times (the characters 04 Fd should appear on the display)
[This number may be different depending on the configuration of your specific model - don`t worry]
Press "PROGRAM", "6", "PROGRAM", "5" (the characters 04 FE should now be displayed)
Press "ENTER" (the display should flash briefly)
Press "RETURN"
Power the player off and then back on
Play a VCD!
If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
The above hack will also enable the 5.1 Speaker Setup menu which is of no use on players which do not have an in-built Dolby Digital decoder (e.g. DVD-3000E and DVD-4730). Therefore on these players perform the above procedure but exchange steps 4 and 5 for:
Press the UP arrow three times (the characters 04 9C should appear on the display)
[This number may be different depending on the configuration of your specific model - don`t worry]
Press "PROGRAM", "4", "PROGRAM", "5" (the characters 04 dE should now be displayed)
Will it now play SVCDs, XVCDs, XSVCDs, or mini-DVDs?
RE: philips dvd 633
hi haggis
configured remote to switch on/off player
pressed magic 085
7 dashes appear on the lcd not 11 as normal
tried to type in number got to 8th number and it started to program over the other inputed numbers, got scared of messing up player at this point and turned it off
hope u can help
wonder
philips dvd 633
anyone got the hack for this player as the rc6 code does not work
many thanks
wonder
RE: LG DA-3520 CODE
Multi-region Remote Hack
Reports confirm that this hack works with the following LG players; DVD-2330P, DVD-3000E, DVD-3350/1/E/C (and clones), DA-3520, DVD-4210, DVD-4710, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
It has been reported that this hack will work with the more recent version of the LG DVD-3200E but not on the earlier version running firmware 1.0.
You can perform this hack as many times as you want and the currently selected Region will stick until you change it again. Only a very long power cut may cause the player to revert to the factory default setting of Region 2 (in which case just perform the hack again).
An odd quirk of this hack is that even when you specifically set the player to Region 1 only, it will still play discs from Region 2! This is actually quite useful if your collection consists of some RCE protected Region 1 titles and also Region 2 discs which do not (normally) have RCE.
If you are having trouble getting the hack to work, try pressing
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display)
Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
Press "PAUSE" on the remote
Power the player off and then back on
If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
RE: ANY HELP WITH HACK FOR PROLINE 2500
1.press the menu button on your remote control
2.using your remote control,enter 1,6,7
3.press the mute button on your remote for all regions
4.press the okay button on your remote.
If you turn of the mains power you may have to reapply the hack.
RE: Prolinedvd2000
leave dvd player empty, with tray closed,
press MENU,1,6,7 in that order,
it will ask you for a region code,
type in region or mute for all regions
RE: LG 4210
WARNING: Do not attempt this hack unless it has been confirmed to work with your player. Reports show that it completely screws-up players which do not have latent VCD capability. If your player is not specifically listed below, then assume that the hack does not work on that model. Choose to ignore this warning at your own peril.
Reports confirm that this hack works with the following LG players; DA-3520, DVD-3000E, DVD-3350/1/E/C, DVD-4210, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
If the transport in your player cannot read CD-R/CD-RW then only original pressed "silver" VCDs can be played.
I strongly advise that you do not experiment with any other values or settings other than the ones specified. Doing so may result in undesired effects (e.g. foreign language menus) or may even disable your player completely.
No changes are saved until you press the "ENTER" button. So if you think you have made a mistake before reaching that point, simply press "RETURN" and the procedure will be cancelled.
I cannot of course accept any responsibility for anything that happens to your player whilst you are poking around with these settings.
Follow these instructions very carefully.
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "1472" on the remote (the characters 01 47 should appear on the display)
[If your player is a non UK model, this number will probably be different - don`t worry]
Press the UP arrow three times (the characters 04 Fd should appear on the display)
[This number may be different depending on the configuration of your specific model - don`t worry]
Press "PROGRAM", "6", "PROGRAM", "5" (the characters 04 FE should now be displayed)
Press "ENTER" (the display should flash briefly)
Press "RETURN"
Power the player off and then back on
Play a VCD!
If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
The above hack will also enable the 5.1 Speaker Setup menu which is of no use on players which do not have an in-built Dolby Digital decoder (e.g. DVD-3000E and DVD-4730). Therefore on these players perform the above procedure but exchange steps 4 and 5 for:
Press the UP arrow three times (the characters 04 9C should appear on the display)
[This number may be different depending on the configuration of your specific model - don`t worry]
Press "PROGRAM", "4", "PROGRAM", "5" (the characters 04 dE should now be displayed)
Will it now play SVCDs, XVCDs, XSVCDs, or mini-DVDs?
RE: LG DVD-2330P.
Multi-region Remote Hack
Reports confirm that this hack works with the following LG players; DVD-2330P, DVD-3000E, DVD-3350/1/E/C (and clones), DA-3520, DVD-4210, DVD-4710, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
It has been reported that this hack will work with the more recent version of the LG DVD-3200E but not on the earlier version running firmware 1.0.
You can perform this hack as many times as you want and the currently selected Region will stick until you change it again. Only a very long power cut may cause the player to revert to the factory default setting of Region 2 (in which case just perform the hack again).
An odd quirk of this hack is that even when you specifically set the player to Region 1 only, it will still play discs from Region 2! This is actually quite useful if your collection consists of some RCE protected Region 1 titles and also Region 2 discs which do not (normally) have RCE.
If you are having trouble getting the hack to work, try pressing
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display)
Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
Press "PAUSE" on the remote
Power the player off and then back on
If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
<"mailto:llortti[at]ku.oc.dvdgl" class="decrypt"> <"mailto:llortti[at]ku.oc.dvdgl" class="decrypt">
<"mailto:llortti[at]ku.oc.esuoherawifics" class="decrypt">
RE: I need a MULIREGION HACK for SONY DAV S-300!
has to be chipped/reprogrammed
checkout www.dvdchips.co.uk
RE: philips 712 What am I doing wrong ?
is it the new digital remote and not the standard remote, check the instruction booklet for dvd codes, if they are not in the book you will need the digital remote model number urc 7541
hope this helps
wonder
RE: Region Hack for Medion MD4310??
1. Power up
2. Open tray
3. Press SETUP
4. Press 0 for "region free"
5. Press PAUSE
6. Press I<< (STEP BACK) button under SLOW/R
7. Press >>I (STEP FORWARD) button under SLOW/F
8. Press SETUP
That`s it. Your Medion 4310 should now be region free...
RE: THOMSON DTH5000-U HACK?????
DTH-3300
DTH-3600
DTH-3700
DTH-4000
DTH-4200
DTH-4500
DTH-5000
DTH-5200
DTH-5400 1. Make sure that there is no disc in the tray and switch on the player.
2. Cold start the player, by holding down the PLAY and STOP buttons on the player.
3. You should see a set of language options. Release the PLAY and STOP buttons.
4. Select your language.
5. Press REPEAT then the following codes for the required region the player is already set to (region you bought the player in):
Region 1 - 2, 9, 3, 3, 4
Region 2 - 3, 8, 7, 6, 7
Region 3 - 5, 6, 7, 3, 2
Region 4 - 7, 6, 8, 8, 4
Region 5 - 5, 3, 8, 1, 4
Region 6 - 2, 4, 4, 6, 2
6. A code will appear, indicating the region setting of your player.
7. Press 9 for region-free, or 1 for region 1, 2 for region 2, etc.
8. Press OPEN/CLOSE on the Player to open the disc tray.
9. Press STANDBY (POWER) on the remote control to close the tray. Next time the player is turned on it will set to the region specified. If the player halts on the FBI Warnings, press Forward Search x2 or faster.
10. Macrovision can also be disabled here.
Note:
Yes, for 3300, 3700, 4000, 4500, 5000, 5200, 5400(needs re-confirming)
RE: NEED HACK FOR REC 3000
has to be chipped/reprogrammed
checkout www.dvdchips.co.uk
RE: minoka
Press Set up on the remote handset
Then on the front panel of the machine Press:
stop
previous
next.
A hidden menu will then appear.from there you can choose the region of your choice.There is also an option to Enable/Disable Macrovision.
RE: Thomson DVD/CD Player DTH 4000
DTH-3300
DTH-3600
DTH-3700
DTH-4000
DTH-4200
DTH-4500
DTH-5000
DTH-5200
DTH-5400 1. Make sure that there is no disc in the tray and switch on the player.
2. Cold start the player, by holding down the PLAY and STOP buttons on the player.
3. You should see a set of language options. Release the PLAY and STOP buttons.
4. Select your language.
5. Press REPEAT then the following codes for the required region the player is already set to (region you bought the player in):
Region 1 - 2, 9, 3, 3, 4
Region 2 - 3, 8, 7, 6, 7
Region 3 - 5, 6, 7, 3, 2
Region 4 - 7, 6, 8, 8, 4
Region 5 - 5, 3, 8, 1, 4
Region 6 - 2, 4, 4, 6, 2
6. A code will appear, indicating the region setting of your player.
7. Press 9 for region-free, or 1 for region 1, 2 for region 2, etc.
8. Press OPEN/CLOSE on the Player to open the disc tray.
9. Press STANDBY (POWER) on the remote control to close the tray. Next time the player is turned on it will set to the region specified. If the player halts on the FBI Warnings, press Forward Search x2 or faster.
10. Macrovision can also be disabled here.
philips tv/dvd combi ph32w6826
can anyone tell me if the philips rc6 hack works with this philips tv/dvd combi
RE: LG 4710 playing VCD`s
checkout http//lgdvd.co.uk
RE: NAD L55
This is the remote hack NAD L55
steps to follow (1) no dvd in player (2) power machine up (3) press the pause button (4) press 314159 "on display you see the region code of the machine" (5) press 0 (6) power machine off (7) power machine up
all these steps must be without stops.
Use at own risk, My L55 is region free and work great.
laptop region help
i have a packard bell laptop with a toshiba sd-c2402 1009 dvd rom drive, using software power dvd, downloaded dvd genie but it does not respond to power dvd. i then installed win dvd software and dvd genie responded say i have 4 more tries at changing regions but region 1 i can hear sound and the warning appears but then the screen goes black, please can anyone help
many thanks
wonder
RE: DVD PLAYER - LG 4210
repeat the hack and watch the front of your dvd player for the word code to appear, this hack has to be done very quickly
hope this helps
wonder
RE: Multiregion hack for LG 2330P
hi tommy
repeat the hack again but watch the front of the dvd player and not the tv screen, you have to perform this hack as quickly as possible as you only have about 2 seconds to input the region code
hope this helps
wonder
RE: GRUNDIG 220 DVD
hold down STOP, OPEN/CLOSE and SKIP FORWARD all at the same time for about 3-4 seconds and a new menu appears on the tv.
IMPORTANT!!!!!! HOLD THESE BUTTONS DOWN ON THE ACTUAL PLAYER NOT ON THE REMOTE CONTROL `CAUSE IT DON`T WORK ON THE REMOTE.
When the menu is up then you can use the remote control to go through the menu.
RE: DVD PLAYER - LG 4210
Multi-region Remote Hack
• Reports confirm that this hack works with the following LG players; DVD-2330P, DVD-3000E, DVD-3350/1/E/C (and clones), DA-3520, DVD-4210, DVD-4710, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
• It has been reported that this hack will work with the more recent version of the LG DVD-3200E but not on the earlier version running firmware 1.0.
• You can perform this hack as many times as you want and the currently selected Region will stick until you change it again. Only a very long power cut may cause the player to revert to the factory default setting of Region 2 (in which case just perform the hack again).
• An odd quirk of this hack is that even when you specifically set the player to Region 1 only, it will still play discs from Region 2! This is actually quite useful if your collection consists of some RCE protected Region 1 titles and also Region 2 discs which do not (normally) have RCE.
• If you are having trouble getting the hack to work, try pressing
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display)
Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
Press "PAUSE" on the remote
Power the player off and then back on
• If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
<"mailto:llortti[at]ku.oc.dvdgl" class="decrypt"> <"mailto:llortti[at]ku.oc.dvdgl" class="decrypt">
<"mailto:llortti[at]ku.oc.esuoherawifics" class="decrypt">
RE: Multiregion hack for LG 2330P
Multi-region Remote Hack
• Reports confirm that this hack works with the following LG players; DVD-2330P, DVD-3000E, DVD-3350/1/E/C (and clones), DA-3520, DVD-4210, DVD-4710, DVD-4730, DVD-4750, DVD-4830, DVD-4950.
• It has been reported that this hack will work with the more recent version of the LG DVD-3200E but not on the earlier version running firmware 1.0.
• You can perform this hack as many times as you want and the currently selected Region will stick until you change it again. Only a very long power cut may cause the player to revert to the factory default setting of Region 2 (in which case just perform the hack again).
• An odd quirk of this hack is that even when you specifically set the player to Region 1 only, it will still play discs from Region 2! This is actually quite useful if your collection consists of some RCE protected Region 1 titles and also Region 2 discs which do not (normally) have RCE.
• If you are having trouble getting the hack to work, try pressing
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display)
Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
Press "PAUSE" on the remote
Power the player off and then back on
• If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
<"mailto:llortti[at]ku.oc.dvdgl" class="decrypt"> <"mailto:llortti[at]ku.oc.dvdgl" class="decrypt">
<"mailto:llortti[at]ku.oc.esuoherawifics" class="decrypt">
RE: Multiregion Hack/Advice for th Sony DAV - S300 System
has to be chipped/reprogrammed
checkout www.dvdchips.co.uk