Jamie_G(Harmless) posted this on Friday, 12th June 2009, 11:38
:)
Anone who has this player will have been trying to hack it for the last few weeks and probably has not managed it.
well my friends, look no further. i successfulyy hacked my sd490 this morning.
Open tray Type 2, 4, 0, 3, 9, 6 and 0 Press Enter to cycle to region 9 Close the tray Turn player Off and back On Note: If the above code doesn`t work then reattempt and leave the tray Open before turning off player
iI tested this using region one copy of Resident Evil that I have. It plays perfectly
RE: region Hack toshiba SD490
funpayback(Harmless) posted this on Thursday, 9th July 2009, 11:34
Hi, i spent a while trying that code but wasn`t getting any screen so i had another surf about and found another forum. They only had a code for the 360 or 360e, it was virtually the same as the code listed here with the exception of a 9 on the end. So, i copied what they said and im now watching my region 1 copy of The Last Starfighter lol
This is what I did.....
Open the tray. Type 2,4,0,3,9,6,0,9 Nothing will appear on screen until the final digit is entered when a 9 will appear at the top of the screen. Close the tray and away you go with a multi-region Turn player Off and back On Note: If the above code doesn`t work then reattempt and leave the tray Open before turning off player
Hope this helps someone Funpayback :D :D
RE: region Hack toshiba SD490
Cherylca(Harmless) posted this on Sunday, 17th October 2010, 15:35
Hi Jamie and Funpayback, How do you go about figuring out the hack region code? I have a Toshiba SDP94SKN just purchased in the US. Want to use it for Region 2 european dvds or make it multiregion.
Help will be much appreciated. thanks
RE: region Hack toshiba SD490
Crazytrucker(Mostly Harmless) posted this on Monday, 25th October 2010, 17:08
Thanks guys for the hack, took a couple of goes, 1st time a bit too slow, 2nd time just right! Where would us grumpy ole technophobes be without you geezers? Thanks again guys. Roy B. aka `Crazytrucker`
RE: region Hack toshiba SD490
Cherylca(Harmless) posted this on Monday, 8th November 2010, 13:51
1. TURN ON THE POWER AND REMOVE ANY DISCS, CLOSE DRAWER 2. WAIT FOR " NO DISC " TO APPEAR ON YOUR DVD PLAYER SCREEN 3. USING YOUR REMOTE CONTROL PRESS: REPEAT 5-6-7-3-2-9 CONSECUTIVELY 4. THEN PRESS THE OPEN/CLOSE BUTTON ON YOUR DVD PLAYER 5. NOW TRY A DVD DISC FROM A DIFFERENT REGION
IF THIS IS NOT PROVING SUCESSFUL RESET THE DVD PLAYER BY PRESSING STOP AND PLAY BUTTONS ON THE REMOTE CONTROL FOR 5 SECONDS SIMULTANEOUSLY, DON`T FORGET TO REMOVE ANY DVD DISCS IN THE DRAWER. THEN TRY STEPS 2 - 4 AGAIN.
