can you try following codes and let me know if anything works, I want to buy one
Notes: the folowing codes will turn your player into what is called "region-free". If you require the player to be a single region, for example region 1, then simply repeat the process and replace the "0" with a "1". This may be required if you have trouble playing DVDs purchased from outside the UK that have Region Code Enhancement technology on them. These titles are in a minority and you will find a substantial amount of titles will play without the need to change region. Our recommendation is that you set the player to region 0 and change to a specific region when the need arises.
DVP3005 / DVP5100
Press system menu on remote control
Go to preference settings
Press 1,3,5,5,6,6
Use Up and Down keys to select 0 and press OK
Press system menu on remote to exit
DVP520
Press system menu on remote control
Go to preference settings
Press 1,3,5,5,6,6
Press 0
Press system menu on remote to exit
DVP630
Open tray on DVD player
Press 7,8,9 on remote control
Press OK
Press 0
Press play on remote control to finish
DVD625 / DVD728 / DVP720SA / DVP762SA / LX3900SA / LX8300SA
Open tray on DVD player
Press 9,9,9,9 on remote control
Press 0
DVDR610
Ensure there is no disc in the tray
Press Tuner on the remote control
Press play 1,5,9 (the display does not change)
Press 1 (the display will then show the digits entered) 2,1,2,1,2,0,0,5,2,5,5, Play
The operation from point 3 onwards must be carried out quickly with no hesitation. Each button press must be within 2 seconds of each other. If there is too long a delay between button presses, the set will just revert to its original condition.
Play can be either pressed on the player or remote control
DVDR70
Switch on DVD recorder and make sure no disc is in the tray
Press the "SYSTEM" button on the remote control
Change the "REMOTE CONTROL USED" from "DVD RECORDER" to "DVD PLAYER"
Store this change (important)
On the remote control press "PLAY,1,5,9" (the display on the recorder will now display 11 dashes)
Now, using the remote enter the following 121 212 005 255 (last few digits won`t appear on the screen - but don`t worry)
Press "PLAY" on the remote
Switch off the recorder and wait for a few seconds
Switch recorder back on and using the remote control press the "SYSTEM" button. Change "REMOTE CONTROL USED" back to "DVD Recorder". Remember to store this change
HDRW720 / DVDR725H
Make sure no disc is in the tray
Press the disc menu on the remote control
Press play,1,5,9 (dashes will appear in the display)
press 1,2,1,2,1,2,0,0,5,2,5,5
Press play
DVDR520H
Make sure no disc is in the tray and the DVD player is switched on
Highlight exit on the on-screen menu
Press 2,9,6,0
Select required region
PET 700
Switch player on
Open tray door
Press setup on the remote control
Select preferences
Press 2,5,2,3,1,5
Press LEFT ARROW
Press DOWN ARROW
Press 0 when the screen displays region code
Press set up to exit
PET 800
Switch player on
Open tray door
Press setup on the remote control
Select preferences
Press 2,1,2,2,2,5
Press LEFT ARROW
Press DOWN ARROW
Press 0 when the screen displays region code
Press set up to exit
14PT6107 Portable TV with DVD Player
In TV mode, on the remote control press 0,6,2,5,9,6 and then press the MENU button
Select the "DVD" option on the menu using the arrow keys, and then press the RIGHT ARROW button
Highlight the "Region" option, and then use the RIGHT ARROW key to change the region from 2, to "ALL"
Exit by pressing the MENU button
If the above method does not work for your model, please use the following method:
Select DVD Mode (blue screen)
Using the remote control, enter 0,6,2,5,9,6
Press the "MENU" button
Select the "DVD" option by using the down arrow on the rmeote control
Press "OK" and the TV serial number and region code setting will be displayed on the screen
Using the remote control, enter the desired region code (e.g. press button 1 for region 1)
Press the standby button on the remote control
Pressing the standby key again will turn on the TV/DVD with the new region set
If the TV/DVD is set to region 0 (all region) the TV/DVD may ask for a DVD password; the default is 0711
