Page 1 of Connecting to Pipex via ADSL Modem/Router

PCs & Mobiles Forum

Connecting to Pipex via ADSL Modem/Router

Top Gunner (Competent) posted this on Thursday, 17th March 2005, 12:45

Hi all,

Attempted to connect to my new Broadband service last night with one of these: Ebuyer 4 port ADSL/Modem Router with no joy.

Connected fine with the supplied Speedtouch though which is no good as I want use Xbox Live.

The diagnostic report pass`s all tests untill the "ppp layer connection" test and then returns a fail.

Any ideas.

Thanks.

RE: Connecting to Pipex via ADSL Modem/Router

Rassilon (Elite) posted this on Thursday, 17th March 2005, 14:24

Sounds like you havent put the details of user account & password into the router?

Set the IP address of the X-Box & put that IP address in the router as a DMZ (De-Militarised Zone), that should allow packets to pass from the XB to the router & the WWW & vice versa.



I quite like the Helpdesk people in a benevolent (as opposed to malevolent) way as they do some valuable work in preventing us being inundated by every halfwit who can work a phone.

This item was edited on Thursday, 17th March 2005, 14:30

RE: Connecting to Pipex via ADSL Modem/Router

Superted (Elite) posted this on Thursday, 17th March 2005, 16:07

Hope this helos a bit, am on pipex as well and use a netgear router.
The router ADSL settings should be as follows................

Does your internet connection require a login - Yes
Encapsulation - PPPoA (PPP over ATM)
Login id - (your Id)@xtreme(your server number).pipex.net
password - (your password)
Idle timeout - 0
IP address - get from isp
Donaim name server (dns) - use these dns servers
primary dns - 158.43.240.4
secondary dns - 158.43.240.3
NAT (network address translation) - enabled
Multi plexing method - VC-Based
Virtual Curcuit - VPI - 0 VCI - 38

You will then need to set up your pc`s ip address or use DHCP, dont forget to set your internet connection setting to - never dial a connection.
As far as I know, the X-box works hapily with DHCP.

Hope that helps,

All the best

Ger.

This item was edited on Thursday, 17th March 2005, 16:17

RE: Connecting to Pipex via ADSL Modem/Router

Top Gunner (Competent) posted this on Thursday, 17th March 2005, 16:18

Thanx for the replies guys.

Pretty sure my password is correct, but will double check 2nite.

Cheers.

RE: Connecting to Pipex via ADSL Modem/Router

Rassilon (Elite) posted this on Thursday, 17th March 2005, 18:12

IP address - get from isp - This would be automatically assigned when you connect, no need to ask.
Domain name server (dns) I havent selected any

Don`t forget to save your settings & reboot. ;)



I quite like the Helpdesk people in a benevolent (as opposed to malevolent) way as they do some valuable work in preventing us being inundated by every halfwit who can work a phone.

This item was edited on Thursday, 17th March 2005, 18:16

RE: Connecting to Pipex via ADSL Modem/Router

Superted (Elite) posted this on Thursday, 17th March 2005, 19:10

Sorry didnt mean get form isp as in give them a ring and ask, that is the setting on the netgear router. As Ras saidm it just means automatically assigned/dhcp ip address.

Should have read it a bit closer

All the best

Ger.

RE: Connecting to Pipex via ADSL Modem/Router

Rassilon (Elite) posted this on Thursday, 17th March 2005, 20:16

No worriesd you wont be the first to read a post & see a completely different problem. ;)



I quite like the Helpdesk people in a benevolent (as opposed to malevolent) way as they do some valuable work in preventing us being inundated by every halfwit who can work a phone.

Go back to PCs & Mobiles Forum threads, or All Forum threads