I have had both models but have never tested RCE discs.
I`m 100% sure both will as you can manually specify the region [1,2,3,4,5,6] as well as use the auto-region facility [13].
Set RCE for region 1 (Country Code)
MiCO DVD-980 Model Hack 7,7,SELECT (With no disc in drive, or tray open)
DVD MK-3*3 SYSTEM SETUP
FIRMWARE VER *******
MICROCODE VER W-2306
#COUNTRY CODE 13
#OP PROH ON 1
PARENTAL PSWD 7890
#PARENTAL C*C* 8583
DVD-ROM:KOREADVS
MOD:DVS-LDR DSL-710A
REV:L007
NEXT PAGE
DVD MK-3*3 SYSTEM SETUP
#MACROVISION 1
#ERROR CORRECTION OFF
SOFTWARE VER:
HONGYU
DATE:2000.6.14
ABOUT
COPYRIGHT C-CUBE
MICROSYSTEMS
MiCO DVD-980 Model Hack 7,4,ENTER (With no disc in drive, or tray open)
DVD MK-3*3 SYSTEM SETUP
FIRMWARE VER ******* --> Always blanked out!
MICROCODE VER W-2354 --> Firmware release. Higher the better (Generally!).
#COUNTRY CODE 13 --> Region. [13] = Auto-region. Manual Region can be set for RCE protective discs.
#OP PROH ON 1 --> Set to 0 to be able to skip FBI warning on DVDs.
PARENTAL PSWD 7890 --? Needed to bypass chosen censorship setting (Child-Lock).
#PARENTAL C*C* 8583 --? ``
DVD-ROM:KOREADVS --> Loader manufacturer. Mines made by DVD in Korea.
MOD:DVS-LDR DSL-710A --> Loader model. Provided by loader to MiCO. DVS/RAITE/Hitachi are known to be used by MiCO.
REV:L009 --> Loader firmware revision. Again, higher the better (Generally!).
NEXT PAGE --> Press [ENTER] to proceed to hack page #2.
Hack Page #2
DVD MK-3*3 SYSTEM SETUP
#MACROVISION 1 --> 0 = Macrovison Protection OFF / 1 = Macrovision Protection ON. Resets to 1 on entering standby.
#ERROR CORRECTION OFF --> [OFF] / FRAME / SLICE. ???
ABOUT --> Press [ENTER] to proceed to hack page #3.
COPYRIGHT C-CUBE --> MiCO Chipset manufacture. C-Cube 3.0 ZiVA.
MICROSYSTEMS
The OP PROH is there to enable you to see the FBI warnings without being able to skip it. Change it at 0 then you`ll probably being able to skip it.
Carrot
