Page 1 of Upgrading your Firmware. Scan SC-2000 Player
Hardware Forum
Upgrading your Firmware. Scan SC-2000 Player
Before upgrading your SC-2000 firmware I suggest you follow the these instructions.
1) From the Standby Mode (Only the RED LED is illuminated) unplug your player from the electrical socket.
2) Wait 20 seconds
3) Insert the power plug back into the electrical socket
4) Install your new firmware according to the relevant instructions.
Note: After changing any of the player’s menu settings, and you find the sound disappears, repeat steps 1 to 3. (Also check that all your leads are connected correctly while the player is disconnected from the electrical supply.)
RE: Upgrading your Firmware. Scan SC-2000 Player
I am trying to upgrade the firmware but am having trouble creating the cdr.
I have written about 4 disks now and all that happens is that the disk is read "loaded" by the player then ejected approx 5 seconds later with nothing changed.
Any suggestions ?
thanks
Tony
RE: Upgrading your Firmware. Scan SC-2000 Player
Did you record it as CDROM-XA Mode 1 with the firmware rom in the route directory ?
Does your TV screen go blue and display TVD000.rom etc...?
Have you checked the version of firmware which you currently have installed on your machine ? This may already be V192 which is the version you might be trying to install ?
When did you purchase your machine. ?
RE: Upgrading your Firmware. Scan SC-2000 Player
And don`t use Nero coz for some reason it doesn`t work.
RE: Upgrading your Firmware. Scan SC-2000 Player
Anyone got a copy of the latest firmware upgrade?
I`ve emailed Nelley, but I guess he`s a bit busy at the moment!
If you could copy to me on evets[at]ku.oc.nomed.tbmc I`d be very grateful.
Ta.
RE: Upgrading your Firmware. Scan SC-2000 Player
Would it not just make more sense to have a website on scan where they posted all the revisions of the Scan SC-2000 firmware instead of messing about with emails and the like.
This website could also include instructions of how to make the firmware CD - comeon guys this would take someone 10 mins to do.
Chris
RE: Upgrading your Firmware. Scan SC-2000 Player
hi there,
when i insert the cd rom it loads then displays message no disc.....When i go into the setup it displays file tvd000.rom and ver 164
I don`t know if i should be looking at anything else on this page?????..........i need help!!!!!!!!!!!!!!!! :))))
RE: Upgrading your Firmware. Scan SC-2000 Player
when i get onto the blue screen this is what is get
CUSTOM ID SCN TDVD-000.ROM
MAIN VER 00000164
NAV VER 000009CE
SUB VER 000000C5
PDW 00000000
CLOCK 00000438
RUN TIME 0000002B
N-SETUP 00000007
S-SETUP 00000001
RESULT 00000002
note that the cdrom does also not eject after it loads.....I have noticed that since i have inserted this disk I seem to get dropout on every single dvd.Matrix r2 is very bad das boot r2 blade r2 romeo must die r1 event horizon r1.........Is there anyone out there who has any idea what i should do.......The bestie boys new dvd sounds ok but it is now impossible for me to watch anything at all.............cheers all....i`m still very much pro scan though