Adolfo(Harmless) posted this on Friday, 6th February 2004, 17:43
RE: Jwin JD-VD130 Region Hack Needed.
GeXuS(Harmless) posted this on Tuesday, 27th April 2004, 04:29
I also need this hack, I`ve tried some hacks for other models but with no luck. I`ve found one that said to enter the setup, there press 1,3,6,9 and the version menu should appear,, also tried pressing left arrow 3 times and right arrow 1 after pressing 1,3,6,9 but nothing.. also tried with the tray open and closed.. The code is 1369 because is the same as the parental lock as i read in other forums.
any functional hack for this device?? thanks in advance
RE: Jwin JD-VD130 Region Hack Needed.
Paris(Elite) posted this on Tuesday, 27th April 2004, 08:58
I have a Roadstar system and this 1369 hack worked for it.. but I have to say it is tricky to enter. don`t stand too close to the unit, and press the keys firmly and carefully on the remote. It took me a few goes to get it right. Then again they could have changed the software.. also try the bush 255 hack.
RE: Jwin JD-VD130 Region Hack Needed.
CodeBreaker(Harmless) posted this on Monday, 10th May 2004, 07:27
Some of the models use different hacks. So try this and respond if it works or not.
Open Tray
Press Program Once
Than press Enter Three Times
Then you should see the region menu
Just use the arrow key down to change it to All Region.
Respond if it works or not. 8)
RE: Jwin JD-VD130 Region Hack Needed.
Unreal(Harmless) posted this on Wednesday, 19th May 2004, 12:13
I tried your hack but it is only visual, the region change does not really happen it seems that this menu is for viewing purposes only. you can also access macrovison :D by pressing the zoom button instead of the prog one in your instructions. Still though a change does not happen. If you please can help me with this since I stuck with a reg1 player in a reg2 market :( . Thanks in advance. :)
Help others
RE: Jwin JD-VD130 Region Hack Needed.
kz1v1l1(Harmless) posted this on Saturday, 29th May 2004, 21:15
hey, i tried your method and it seems to work, the problem is I don`t know what to after changng the region, I can`t save the option, I don`t know how to reset the player how do I do that? alavaznitsuga[at]moc.liamtoh
RE: Jwin JD-VD130 Region Hack Needed.
Isaacc(Harmless) posted this on Tuesday, 1st June 2004, 14:19
You just have to press the Stop (square) button after changing the region setting to 0 and a message will appear indicating that the region setting was changed. That`s all.
RE: Jwin JD-VD130 Region Hack Needed.
partytime(Harmless) posted this on Friday, 4th June 2004, 22:21
My player accepts the SET UP, 1,3,6,9 crack for Region free, but does anyone knows how to disable the Macrovision protection? (I`ve tried the ZOOM, ENTER, ENTER, ENTER already but didn`t work) thanks, emitytrap[at]moc.aidemrats
This item was edited on Friday, 4th June 2004, 23:22
