Page 1 of Confirmed Hack for the Phillips LX8000
Hack Help Forum
Confirmed Hack for the Phillips LX8000
I’ve seen the hack with a RC6 below floating around various forums for a while, but confirmation of the hack as been a bit sketchy. I can now confirm that the hack works perfectly on my virgin untouched player with no problem what so ever.
HACK
With a suitable remote (one for all 4in 1 / 6 in 1 etc)
Step 1
Set op codes for the DVD as per normal (I had to phone the oneforall help line to update my RC6 as the usually 0539 setup did work for my player.)
Step 2
Press DVD button
Make sure player can be powered up from the remote (which means the setup code is right)
Step 3
Press MAGIC button once and the `DVD` button should flash once.
ENTER 085
ENTER 222 222 005 255 Play
Step 4
Power DVD off for 10 secs
Step 5
Power up
Five speaker display MUST be evident and the `multichannel` option should be still evident in the menus.
Player should now operate R1 and R2 discs with Surround working....well mine now does.
Hope this helps m8s
Mav
RE: Confirmed Hack for the Phillips LX8000
Hi - did you try the previous hack for the LX8000? I tried it on my new LX8000SA and have now lost the 5.1 cinema sound! Do you know if this new hack restores the 5.1 sound or any other ideas how I can reset my player back to it`s original state?
RE: Confirmed Hack for the Phillips LX8000
No I didn`t try any other hacks my machine was region 2 fresh out of the box.
Andy if you go to www.dvdanswers.co.uk and go to the hardware forum I think there is a soultion to your problem.
let me know how you got on
Mav
RE: Confirmed Hack for the Phillips LX8000
Mav - Thanks for tip. After my last post I found this on another forum and "play 159 221 030 08 play" has restored 5.1 sound on my player.
Think I`ll buy a oneforall remote and use your hack as this seems a safer bet!
Andy.