Info and forum posts by 'froggs'
This user hasn't used our main site yet, so has no main account at present.
Joined on: Thursday, 2nd January 2003, 23:43, Last used: Thursday, 2nd January 2003, 23:43
Access Level: Harmless
About this user: This user has chosen not to submit a description :(
This user has posted a total of 3 messages. On average, since joining, this user has posted 0 messages a day, or 0 messages a week. In the last 30 days, this user has posted 0 messages, which is on average 0 messages a day.
Recent Messages Posted:
RE: PACIFIC 1002
it will output both dolby digital and dts 5.1 via a digital coax or optical cable through a home cinema amp, but it does not have on board decoders
RE: Sky TV Link Magic Eye Problems
replace both conections at both side and ensure that the coax barrel used is firmley on to rf outlet 2, after doing that de - activate the rf 2 power in the installer setup menu, reset the stb at the mains ( unplug for 2 mins and the reboot ), once rebooted re-activate the rf 2 power and save settings, try the tv link again, also make sure that the cable used has no joints or splits in it. 1 other thing, your digibox isn`t a grundig by any chance, the new gds3000 are ok but the younger models had a few problems where as they would light the led up and work for so long but then fail but the led would still show on? all the best ,
RE: Hack needed for schneider DVD1003
i believe that this model is a rebadged pacific 1002 and the same hack for that works for the 1003 which is:-
To change the current region setting on this player
1. Press the Open/Close button on your remote control
2. Press the Clear button on your remote control
3. Press the 1 button on your remote control
4. Press the 3 button on your remote control
5. Press the 6 button on your remote control
6. Press the 9 button on your remote control
7. Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 0 for multi-region playback
8. Press the Open/Close button on your remote control
To change the current region setting on this player if the above does not work
1. Press the Setup button on your remote control
2. Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 7 for multi-region playback
3. Press the Pause/Step button on your remote control
4. Press the Previous button on your remote control
5. Press the Next button on your remote control
6. Press the Setup button on your remote control
hope it helps